A service provided by Brownfield Oil Tools Ltd. +359 878 532030office (at) boiltools.com
Brownfield Oil Tools

Sucker Rods Supply / Sucker rods / API Sucker Rods

TECHNICAL SHEET

API Sucker Rods

Rods and Couplings to API 11B

API grade and high-strength rod strings, with matching couplings, for beam pumping and progressive cavity applications.

Bundles of API sucker rods with coloured ends, stacked on racks
API SUCKER ROD BUNDLES

5/8–1-1/8 in

Rod body diameters

25 / 30 ft

Standard rod lengths

API 11B

Grades C, K and D

140 ksi

Max. API grade tensile

Overview

Brownfield supplies API Grade C, K and D sucker rods, high-strength rods and matching couplings for beam and progressive cavity pumping.

Every rod is heat treated and finished with pin ends machined and cold-rolled to API threads. Rolling displaces the steel instead of cutting it, which work-hardens the thread root where fatigue failures usually begin. Grade, colour code and heat treatment are traceable on every order.

Applications

  • Beam pumping: conventional rod strings
  • Progressive cavity pumping: rod strings for PCP wells
  • Deep, heavily loaded wells: high-strength rods

Benefits

  • Grade matched to load, depth and corrosion
  • Rolled threads: higher fatigue strength
  • Rods, pony rods and couplings from one source

Technical data

StandardAPI Specification 11B
Rod body diameter (in.)5/8 · 3/4 · 7/8 · 1 · 1-1/8
Nominal pin diameter (in.)15/16 · 1-1/16 · 1-3/16 · 1-3/8 · 1-9/16
Wrench square (in.)7/8 · 1 · 1 · 1-5/16 · 1-1/2
Standard lengths25 ft (7.6 m) and 30 ft (9.1 m)
Pony rod lengths2, 4, 6, 8 and 10 ft, same grades as the rods
Weight of 25 ft rod, lb27.2 · 38.5 · 52.0 · 69.9 · 88.7
API colour codesC white · K blue · D carbon brown · D Cr-Mo yellow · D alloy orange
Steel typesC: 1536 · K: 4623 · D: 1541, 4142, 4720
Heat treatmentN&T: normalized and tempered · Q&T: quenched and tempered
ThreadsCold-rolled API threads on all pin ends
CouplingsAPI Grade T and Grade SM (spray metal), 5/8 – 1-1/8 in.
Coupling versionsStandard, oversize and slim-hole

Rod grades

Swipe the table to see all columns.

Rod gradeYield, ksiTensile, ksiHardness, HBHeat treatment
Grade C60 min90–115185–240Normalized
Grade K60 min90–115185–231Norm. & temp.
Grade D85 min115–140240–294Norm. & temp.
High-strength, N&T115 min140–150286–319Norm. & temp.
High-strength, Q&T130–145140–155285–311Quench. & temp.

Values per API Specification 11B. Minimum values where marked; ranges for tensile and hardness.

Ordering

To request a quotation

  1. Well depth and pump setting depth
  2. Tubing size and pump bore
  3. Pumping unit rating, stroke length and speed
  4. Fluid: water cut, viscosity, sand, scale
  5. Corrosion: CO2, H2S, inhibition programme
  6. Quantity, grade, size, length, coupling type

Data needed for string design

  • Pumping method (beam or progressive cavity)
  • Well geometry: deviation, dog-legs, horizontal sections
  • Rod grade, size and length
  • Coupling type

Talk to our engineering team about your well

Send us your well data and we will help you select grade, size and length for your string.

Values for guidance, subject to change without notice. Final string design is the operator's responsibility.